扫一扫手机版二维码 手机
语言版本:
值得信任 追求卓越 创造辉煌
您现在所处位置:首页 / 采购必读 / 采购必读
威尼斯人欧洲杯信息
· 采购必读
动态 更多
2.Optical parameters and relationship of anti glare glass
The main factors affecting the anti glare effect of glass are transmissivity, reflectivity, surface roughness, glossiness and haze. The relationship between them is shown in figure 4.

 
威尼斯人网全球最大的赌场
 
Figure 4 anti glare optical parameter relationship diagram
 
Gloss: mainly to measure the AG effect, general gloss range from 20-110%.
Haze: mainly to measure the effect of AG fog, and gloss in a certain sense inversely proportional.
Surface roughness: a measure of the roughness of the diffuse reflection point on the surface of AG glass, generally 0.06-0.25um.
(1) the glossiness is inversely proportional to the haze; the higher the glossiness, the lower the haze; the glossiness is directly proportional to the clarity; the higher the glossiness is, the higher the clarity is.



 
Figure 5 Relationship between glossiness, haze and clarity
 
(2) glossiness is inversely proportional to roughness. The lower the glossiness, the higher the roughness of the same piece of glass. The rougher the surface, the more the diffusion of light. Reducing gloss and increasing roughness can reduce the flash point of light. Of course, that doesn't mean that improving the roughness will reduce the flash point, and the flash point will come from other causes.
(3) the glossiness is proportional to the flash point. The lower the gloss, the lower the flash point. When the size of the particle matches the pixel of the display, the higher the roughness, the more rough the surface can increase the diffusion of light, the less the flash point. The next generation of display will require more and more resolution, and the flash point will be paid more attention to.

威尼斯7456

Figure 6 the relationship between glossiness and flash point
威尼斯人官网强大财团
免费咨询热线:400 820 0368
总机(TEL):0512-50137800
地址:江苏省昆山市千灯镇汶浦路61号
© 2009-2018 翔实节能玻璃
推荐使用:IE9+ Chrome Firefox safari opera 保持版本更新
版权所有 严禁复制 技术支持: